| Name |
Semi Servo Sanitary Napkins Making Machine |
PLC Control System |
Mitsubishi (Japan) |
| Design Speed |
800 pcs/minute |
Touchable screen |
Mitsubishi (Japan) |
| Stable Working Speed |
500 to 600 \pcs/minute |
Sensor |
Banner(USA) |
| Qualified Rate |
98% |
Safety production |
Schneider(France) |
| Efficiency |
90% |
Cutter raw material |
W6(USA) |
| Installation Capacity |
200 Kw |
Gear (according to usage) |
HRB/NSK/(China/Japan/) |
| Electricity |
380V+-5%,50Hz |
Low voltage electronic |
Schneider(France) |
| Wire |
3*75+2*25 mm^2 |
Pneumatic element |
Airtac(Chinese Taiwan) |
| Lowest pressure |
6 kg/cm2 ≥0.6mpa |
Solenoid valve |
Airtac(Chinese Taiwan) |
| Total weight |
About 50 tons |
Electrical connection terminal |
Phoenix (Germany) |
| Machine size |
25×3×4.5 M (L×W×H) |
Temperature controlling system |
Omron(Japan) |
| Machine color |
Rice white ,can be changed by order |
Pressure regulating valve |
Airtac(Chinese Taiwan) |
| Product size |
240mm,280mm two size (according to order) |
Timing belt |
Jaguar(China) |
| Containers |
4X40HQ
Packaging: PE cover packing in container |
High-speed joint |
SMC(Japan) |
Machine frame structure and main characters :
Reasonably solid square steel frame: Panel 25mm thick, adopt specular paint, 6 surfaces processing, solid cage with 60 * 60mm square steel in module design, the base frame with square tube 120mm × 120mm, 16mm thick bottom plate, 6 surface processing also ,widening after gearbox for repair. Spliced type main board by screw, make sure the high efficiency .
Crusher system : 1)Upright pulp frame, equipped with auto rising system by sliding motor, more convenient for loading and uploading pulp, the diameter of pulp should be ≤1400mm
2)Single Entrance Crusher, horizontally feeding, adopted with alloy sawmill, can crush untreated, half treated and treated pulp, pulp width is ≤480mm , the capacity of crusher motor is 30KW, bursting strength of pulp is ≤1200kpa, can crush about 600kg/hour. Equip with rubber base,can absorb vibration and noise
3)Pulp feeding system adopted with servo control, can change according to the production speed and adjust the feeding quantity automatically, also adopted with auto detecting function, will auto stop and alarm when raw material runs out or break up
4)the roller type wood pulp feeding mechanism uses both ends of the air cylinder to pressurize, and the manual valve controls the action of the air cylinder to facilitate the loading of wood pulp
5)Crusher bearing has overheating protection
Driving system:
1)Adopt full servo controlling, main raw materials unwinding driven by frequency control, to guarantee the precision and stability of the machine in high speed.
2)All cutter racks adopt with CNC processing, guarantee the precision of bade and prolong the cutter's lifetime
3)Cutter adopts universal joint coupler transmission
4)Stressed timing belt is widen
Air supply:
1)Vacuum, drum former, dust and wastage collection during production process adopt with several sets air pump and positive pressure blower.
2)Air supply is set on the top of machine, made by stainless steel drawing tube, reduce the static electricity, high pressure blower unified air supply, pressure can be adjusted.
3)Air tube is set on the top of machine, unified conveyed by galvanized pipe, connect necessary distributing pipe at the nearest place, neatly arrangement.
Detection system:
1)Raw materials connection joint auto detection, auto rejection
2)Raw materials breaking auto alarm and auto stop
3)Detection switch shelf is convenient to adjust
Driving system:
1)Single button starts up one by one to reduce the power network impact
2)Without blower start up and glue applicator start up, machine cannot start up. Also this function can be shield.
Safety unit:
1)Machine equipped with urgent stop button .
2)Machine equipped with safety pull switch, ensure the safety for operators .
3)Machine equipped with the unit for up speed, down speed, alarm button and the auto up speed button, it's easy for operating .
4)Machine equipped with safety plate on the cutting parts.
5)Machine equipped with repair lighting.
Independent wire casing is set at the side of back transmission box, divided into strong and weak lines, neatly arrangement, with independent door.
Our company also can provide all different kinds raw materials for the baby diaper,adult diaper,sanitary pads,under pads.
Audited Supplier 
){kind=link}
){kind=link}