Machine frame structure and main characters:
1).Solid square steel frame: Panel 30mm thick , solid cage use 60 * 60mm square steel, the base use 120mm × 120mm square tube, back transmission gearbox are widened for easy repair. Bottom panel 18mm thick. The main frame panel adopts six-sided high-precision plane grinding and module design to ensure the stability of high-speed operation.
Adopt stainless steel covering the machine surface, better appearance and much cleaner.
2)Adopt noise reduction in the transmission side frame of the whole machine.
3)The attached equipment is fixed on the ground after adjusting the height.
2 sets of Crusher system, continuous fluff forming drum(diameter ~1500mm)
1) Upright pulp frame, equipped with auto lifting system, convenient for loading and uploading pulp, the diameter of pulp should be ≤1400mm
2) Crusher, horizontally feeding, adopted with sawmill, can crush untreated, half treated and treated pulp, pulp width is ≤480mm, the capacity of crusher motor is 75+30KW, bursting strength of pulp is ≤1200kpa, crush ability about 800kg+600kg/hour
3) Pulp feeding system adopted with servo control, feeding speed can change according to the production speed automatically, also adopted with auto detecting function, will auto stop and alarm when raw material run out or break up
){kind=link}