| Design Speed |
800 pcs per minute |
| Working Speed |
700 pcs per minute |
| Finial products size |
240mm,290mm,320mm |
| Raw Materails |
Fluff Pulp,SAP,Non-Woven,PE film,Hot Melt Glue |
| Qualified Rate |
>=97% |
| Efficiency |
>=85% |
1,Machine frame structure and main characters :
Reasonably solid square steel frame: Panel 25mm thick, adopt specular paint, 6 surfaces processing, solid cage with 60 * 60mm square steel in module design, the base frame with square tube 120mm × 120mm, 16mm thick bottom plate, 6 surface processing also ,widening after gearbox for repair. Spliced type main board by screw, make sure the high efficiency .
2,Driving system :
1)Adopt full servo controlling, main raw materials unwinding driven by frequency control, to guarantee the precision and stability of the machine in high speed.
2)All cutter racks adopt with CNC processing, guarantee the precision of bade and prolong the cutter's lifetime.
3)Cutter adopts universal joint coupler transmission.
4)Stressed timing belt is widen
3.Safety unit
1)Machine equipped with urgent stop button.
2)Machine equipped with safety pull switch, ensure the safety for operators
3)Machine equipped with the unit for up speed, down speed, alarm button and the auto up speed button, it's easy for operating.
4)Machine equipped with safety plate on the cutting parts.
5)Machine equipped with repair lighting.
4.Factory-set-up should meet these demands:
1.Without vibration, clean and clear environment, good ventilation, no flammable and explosive and corrosive substances around.
2. Flat concrete ground, concrete number should be at least 300#; ground level difference should be within 15-25mm, so that machine adjustment is more convenient.
3.Ground should have enough bearing capacity. Concrete ground thickness is no less than 200mm. if machine is put on the 2nd floor, concrete floor(reinforced concrete pouring) average bearing capacity is at least 3.5tons/sm. machine is put no more than on the 2nd floor.
4.To keep at least 1 meter distance between the back side of machine (including attached equipment) and the walls.
5.To prevent the accident due to the uneven ground.
6.The inside temperature in the factory is no less than 12-15ºC.
){kind=link}